color panel Ditron 2 axis digital readout for milling machine

Description:

1:fit for 2 or 3 axis milling machines
2:13 basic functions and 7special functions
3:ISO9001:2008, CE, ROHS
4:fair price

D60DRO

 

D60-2V Full-featured digital readout (milling machine, boring machine,lathe machine, grinding machine)

D60-3V Full-featured digital readout (milling machine, boring machine,lathe machine, grinding machine, electronic sparkmachine)

D60-2M/3M  millingmachine and boring machine DRO

D60-3E  electronicspark DRO

D501-1V single-axisDRO

 

D60  DRO technicalparameter

1)Voltage range: AC80V-260V/50HZ-60HZ

2)Power dissipation:20VA

3)Coordinate number:1/2/3

4)Display: 7 bit display withsigned

5)Times frequency: 4X

6)Readout box input signal: TTL,ELA-422-A

7)Inputfrequency:>100KHZ

8)Resolution:10um, 5um, 1um,0.5um, 0.1um

9)Operating keyboard: light touchbuttons

10)Linear scale Grating space:0.04mm, 0.02mm, 0.01mm, power supply is 5V.the difference betweentwo and four TTL output signal is 90°.

D60 Functionintroduction

1)Circular drilling function:Digital readout can automatically calculate the location of thehole according to the inputted data

2)Linear drilling function:Opposite to the axis of any angle, only the hole spacing remainfixed value, The DRO can calculate the location of the holeaccording to the inputted data

3)Tool radius compensation: Inthe use of cylindrical milling tool carrier, the tool radius mustbe taken into account. The direction of process will decide theincrease or decrease of calculated value .once the tool number isinputted, the DRO value will be saved.

4)Determine the workpiece centeronly through the tool or touching the two points of workpiece, theDRO can calculate the workpiece center

5)200 sets tool base: whilerepeat the same process in the workpiece, you can store the toolvalue which will be convenience to the operator

6)Round arc processing: sampleround processing and two axis arc processing

7)Function calculator: calculatorfunction can improve operation efficiently

8)Slope calculation: input thetwo points of workpiece, the DRO can calculate the slope of theworkpiece.

9) Z-axis combinationcalculation: Z-axis can display the combination displacement of twoparallel axis

10)  Preset value: presetthe radius of workpiece

11)  Linear scale errorcompensation or non-linear scale error compensation: compensationto ensure absolute precision and maximum efficiency. Multi-pointcompensation can reduce the machine error.

12)  Numerical filteringfunction

13)  EDM depth control: canassist tool make depth control efficiently

 

 

 

 

 

 

 

                                                

  

color panel Ditron 2 axis digital readout for milling machine